EMX CarSense Logic Interface (CS303-L) - BFT-EMXCS303L
The CarSense 303-L Logic Interface works with CS303-DB Direct Burial or CS303-FP Flat Pack magnetoresistive sensors. The Logic Interface expands the functionality of the sensors by providing additional features and application specific logic operations to meet the needs of more demanding installations.
The Logic Interface allows one or two sensors to be connected and provides 6 logic functions and 2 separate relay outputs. Once the sensor(s) has been programmed using the CS303-C1 Control Unit, the sensor(s) store the settings and operate independent of the Control Unit and can be connected to the Logic Interface.
The CS303 sensor provides up to a 5ft. sensing range in all directions. The CS303L Logic Interface allows 2 sensors to be connected with one output to extend the detection area up to 20ft. Also, A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors.
The status LEDs and durable housing with a standard 11-pin plug-in socket makes installation quick and easy.
Logic Functions:
- Two relay operation
- A/B directional logic
- Pulse on entry
- Pulse on exit
- Double relay
- Relay 1 only
Specifications:
- Power indicator: Green LED
- Detect indicator: 2 Red LEDs
- Configuration selector: 10 position rotary switch
- Outputs: Relay 1: SPDT (form C); Relay 2: SPST (form A)
- Output ratings: 1A @ 24 VDC/120 VAC
- Operating environment: -40o C…82o C (-40o F…180o F) 0…95% relative humidity
- Housing material: ABS
- Enclosure: IP30
- Power: 12-30 VDC and 24 VAC
- Operating current (standby/detect): One sensor connected: 22/35mA Two sensors connected: 33/60mA
- Supply protection circuitry: Reverse polarity and fuse protected
- Dimensions: 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
- Weight: 0.25 lbs. (113 g)
- Connector: 11 pin male connector (JEDEC B11-88)
Literature:
