BFT DEIMOS BT UL/CSA KR925228 00003 with 2 Mittos, 1 Photo Eye, 4 Racks and Battery Backup - BFT-SLKIT2
Electromechanical automation for rack sliding gates up to 1,100Lbs and 75 Feet.
- 1 - BFT DEIMOS BT UL/CSA KR925228 00003
- 4 - BFT Plastic Rack - BFT-D221073
- 1 - BFT Monitored Photoelectric Beam Sensor (Retro-Reflective Type) KIRREFLPHOT001 - BFT-KIRREFLPOTO01
- 2 - BFT 2-Channel Mitto B Rcb02 R1 Transmitter - BFT-D111904
- 1 - BFT P125002 Battery Backup - BFT-P125002
- SMART TECNOLOGY
- Electromechanical microswitches that control the end of stroke.
- Incorporated two-channel rolling code radio receiver.
- Self contained control panel unit with self-learning and self-diagnostic functions.
- Control unit compatible with the EElink protocol and Solor compatiable with “Ecosol” solar kit
- SAFE USE
- This version powered at 24V has been specially designed for simpler and faster installation in compliance with latest safety standards.
- The 24 V electrical motor guarantees maximum accuracy in torque and speed control on the one hand, and on the other makes it suitable for intensive gate use, even in industrial installations.Optional battery back-up can be fitted within the operator casing. These operators are all “Ecosol” solar compatible.
- Thanks to the obstruction sensing device, the operator reverses motion and prevents damage to people and vehicles in the event of contact.
- Control panel: QSC D UL (incorporated)
- Reversible/irreversible operator: irreversible
- Power supply: 120 V 60 Hz single-phase
- Absorbed power: 0.1 hp (70 W)
- Thermal protection: integrated in the control unit
- Leaf speed: 7.9 ips (12 m/min)
- Output rotational speed: 79 rpm
- Pinion pitch: 4 mm (14 teeth)
- Impact reaction: electronic torque limiter
- Limit switches: electromechanical
- Manual release: mechanical release with knob
- Operating cycle: intensive use
- Environmental conditions: from 5°F (-15°C) to 122°F (+50°C)
- Degree of protection: IP24
- Operator weight: 16 lbs (~7 kg)
- Dimensions: see drawing next page
BFT Monitored Photoelectric Beam Sensor KIRPOLAPHOT001 - BFT-KIRPOLAPHOTO01
UL325-2016 MONITORED Photoelectric Beam Sensor (Retro-Reflective Type)
- Sensing range adjustable potentiometer (optional)
- PC casing, anti fog / dew / rains
- IP-55 Water Proof
- Square / Round Shape reflector selectable
- Wrap around mounting bracket
- Input Volt.: 12-30V DC/AC 60 Hz
- 2 Led indicators for power and beam alignment
- Hood for round / square shape reflector(Optional)
- Overhead door
- Swing gate
- Sliding door
- Parking lot
- Detection Method Retro-Reflection
- Sensing Range 10 meters
- Supply Volt. 12-30V DC/AC 60 Hz
- Response Time 10 msec.
- Sensing Range(adjustable) 10m
- Emitting Element IR LED
- Led Indicator (Left Side) Beam Aligned Beam Broken N.C.: ON N.C.: OFF N.O.: ON N.O.: OFF
- Power Led Indicator (Right Side) When Powered: Led ON Power Off: Led OFF Dimensions 20mm(w) 63mm(h) 39mm(d)
- Current consumption 100mA
- Ouput Method: SPDT Relay output
- Switching Capacity: 30VDC/AC, 2A
- Connection Method: Cable wires: Brown / Blue / White / Black / Gray
- Housing Material: Case: PC Lens: PC
- Operating Temp.: -4 F to 131 F (-20 C to 55 C)
- Water Proof: IP-55
- Approvals : UL325-2016 & CE
- Cable wires 2517 / 24AWG / 5 cores
BFT Plastic Rack - BFT-D221073
The BFT-D221073 is a plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots. Max load capacity 600Kg.
BFT 2-Channel Mitto B Rcb02 R1 Transmitter - BFT-D111904
The BFT-D111904 is a transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
- U-Link: No
- Number of batteries: 1
- Battery type: 23 a
- Voltage: 12 v
- Range: 50/100 m
BFT P125002 Battery Backup - BFT-P125002
The BFT SB-BAT (P125002) is a 24v DC battery backup system for the Deimos BT series of slide gate operators