The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Access Control Kit - 356-KIT1I

$245.00
(No reviews yet) Write a Review
SKU:
356-KIT1I
Access Control Kit - 356-KIT1I

Access Control Kit - 356-KIT1I

Kit Includes:

  • 1 - 600lbs Indoor Electric Lock with LED Sensor - 356-ML600LED
  • 1 - Wireless RF Indoor Access Control Receiver - 356-8011
  • 1 - 2.4Ghz Indoor Wireless Keypad Reader Battery Operated Standalone - 356-8009
  • 1 - Indoor Access Control 2.4GHz Wireless Request to Exit Button Battery Operated - 356-8013
  • 1 - 12V 1 Amp 1000ma Camera Power Supply - 058-188
  • 1 - L and Z Bracket for 600lbs Electromagnetic Lock - 356-ZL600

600lbs Indoor Electric Lock with LED Sensor - 356-ML600LED

The 356-ML600LED 600 series electromagnetic locks are renown with its excellent holding force and the remarkable features. The series compliance to CE and PSB Test are manufactured under the highest quality control to achieve the commitment to customer who always satisfied with maximum quality and reliability.

Features:

  • Voltage Input: 12 VDC / 24 VDC
  • Current Draw: 12V / 500mA; 24V / 250mA (±5%)
  • Holding Force: Up to 600 lbs (272 kg)

Specifications:

  • Voltage Input: 12 VDC / 24 VDC
  • Current Draw: 12V / 500mA ; 24V / 250mA (±5%)
  • Holding Force: Up to 600 lbs (272 kg)
  • Hall Effect: Contact SPDT rated 2A at 24 VDC
  • Magnetic Contact Rating: 28 VDC, 0.5A, 10W
  • Anti-Rust Surface Treatment: Blue Zinc Plating
  • Operating Temperature: 0~55°C ( 32~131°F)
  • Operating Humidity: 0~95% ( non condensing)
  • Weight: ( Magnet) 1.1 kg (±1%)
  • Dimensions: Magnet - (L)250x(W)42x(T)25 mm Armature - (L)180x(W)38x(T)11 mm

Literature:

600lbs Indoor Electric Lock with LED Sensor - 356-ML600LED manual 600lbs Indoor Electric Lock with LED Sensor - 356-ML600LED datasheet

Wireless RF Indoor Access Control Receiver - 356-8011

The 356-8011 is a wireless black RF receiver designed for access control. The receiver is powered up by wiring a power supply and then simply wiring your receiver to your maglock, strike, or drop bolt. The compatible components with this receiver, the 8009/8010 keypad and 8013/8014 exit button, allow for a complete access control system within minutes. You can install this product on any type of wall with either screws or double sided tape.

Attention:
  • Keep in mind that the only compatible models that will work with this receiver are the 356-8010, 356-8009 Wireless Keypad/Reader and the 356-8013, 356-8014 Wireless Exit Button. This receiver is not compatible with no other devices.

This product has a 3 year warranty with full access to tech support in the USA!

Features:

  • Available Colors: Black (356-8011) – White (356-8012)

Specifications:

  • Operating Voltage: 12V DC ±20%
  • Idle Current: ≤20uA
  • Working Current: ≤40mA
  • Communication Frequency: 2.4G
  • Communication Distance: 15m Maximum (50 feet)
  • Relay Contact Load: 2Amp Maximum
  • Environment: Indoor
  • Operating Temperature: -20°C~60°C (-4°F~140°F)
  • Operating Humidity: 0%~86%RH
  • Physical: ABS Shell
  • Dimensions: 65L × 54W × 19D (mm) - 2.55L x 2.12W x 0.74D (in.)
  • Unit Weight: 40g

Literature:

Wireless RF Indoor Access Control Receiver - 356-8011 manual Wireless RF Indoor Access Control Receiver - 356-8011 datasheet

2.4Ghz Indoor Wireless Keypad Reader Battery Operated Standalone - 356-8009

  • 500 PIN / card users
  • PIN length: 4~8 digits
  • 125KHz EM card
  • Communication frequency: 2.4G
  • Communication distance: 15m Max. (50 feet)
  • Pulse mode, toggle mode
  • Tri-color LED status display
  • Ultra low power consumption (wireless keypad≤10uA)

12V 1 Amp 1000ma Camera Power Supply - 058-188

1Amp (1000mA), 12VDC power supply. This power supply has a 2.5mm female power connector with a positive center conductor.

Indoor Access Control 2.4GHz Wireless Request to Exit Button Battery Operated - 356-8013

The 356-8013 is a wireless black exit button designed for access control. The exit button is used as a wireless transmitter to gain entrance or allow exit on a door where the system is installed. Using the compatible keypad and receiver, the 8009/8010 and 8011/8012, this gives you a safe and secure system within minutes of just simple programming. The wireless exit button uses 1 CR2032 battery (similar to a watch battery), which IS INCLUDED.

Attention:

  • The Wireless Exit Button uses 1 unit of a CR2032 battery (similar to a watch battery), THE BATTERY IS INCLUDED FOR THE EXIT BUTTON.
  • This Wireless Exit Button is only compatible with the Visionis VIS-8011 and VIS-8012 Wireless Receiver. Not compatible with no other Receiver.
  • The user must pair this device with the Receiver manually.

Specifications:

  • Operating Voltage: 1 unit of 2023 Lithium battery
  • Idle Current: ≤6uA
  • Working Current: ≤5mA
  • Communication Frequency: 2.4G
  • Communication Distance: 15m Maximum (50 feet)
  • Relay Contact Load: 2Amp Maximum
  • Environment: Indoor
  • Operating Temperature: -20°C~60°C (-4°F~140°F)
  • Operating Humidity: 0%~86%RH
  • Physical: ABS Shell
  • Dimensions: 83L × 40W × 16D (mm) - 3.26L x 1.57W x 0.62D (in.)
  • Unit Weight: 30g

Literature:

wireless indoor access control request to exit button 356-8013 manual wireless indoor access control request to exit button 356-8013 datasheet

L and Z Bracket for 600lbs Electromagnetic Lock - 356-ZL600

The 356-ZL600 is an L and Z bracket for 600lbs electromagnetic lock

Features:

  • For Inswing Door Applications

Literature:

L and Z Bracket for 600lbs Electromagnetic Lock - 356-ZL600 datasheet